Does my pump need anchor bolts?
/Yes anchor bolts resist upward forces created by the pump.
Does my compressor need anchor bolts?
/Yes anchor bolts resist upward forces created by the compressor.
What type of anchor bolts should I use?
/Anchor bolts should be made of steel and conform to ASTM-A36 or ASTM A575-M1020.
How long do my anchor bolts need to be?
/The number of anchor bolts are determined by the rotating equipment manufacturer.
What keeps anchor bolts from pulling through?
/Anchor bolts are required to have an anti-pull out device generally this is a washer with a nut that is tack welded on the end so it cannot be unthreaded.
What keeps anchor bolts from pulling out?
/Anchor bolts are required to have an anti-pull out device generally this is a washer with a nut that is tack welded on the end so it cannot be unthreaded.
When should I torque anchor bolts?
/Final torque should be taken on an anchor bolt after the grout is cured and the temporary leveling devices are removed.
How much should I torque anchor bolts?
/An anchor bolt should have a torque 80 to 85% of bolt yield provided it has a proper stretch length.
What material should I use to set anchor bolts?
/When setting anchor bolts it is recommended they are set in a two-part epoxy, Chockfast Grey.
How big should I core holes for anchor bolts in concrete?
/When coring holes in a concrete foundation for anchor bolts, the diameter of the core should be 3 times the bolt diameter.
Should I set anchor bolts with cement or epoxy?
/Epoxy is recommended to be used for setting anchor bolts due to its superior adhesion properties.
What is the best method of installing anchor bolts?
/The best method for installing anchor bolts is set them in the foundation, inside the rebar cage. This should be done with the required pipe sleeve at the time the foundation is poured.
What if my anchor bolts are broken?
/If the anchor bolt breaks you will need to core drill the broken anchor bolt out and install a new anchor bolt in its place.
Who should I specify how many anchor bolts are needed?
/The equipment manufacturer should specify the required number of anchor bolts.
How should I attach mounting plates to a foundation?
/Mounting plates should be attached to a foundation with anchor bolts.
How large of a diameter should I core for an anchor bolt?
/When installing an anchor bolt the hole to be cored should be 3 times the bolt diameter.
What should I use as a non-bonding filler at the top of an anchor bolt pocket?
/The non-bonding fill at the top of an anchor bolt can be an elastic material or an expanding foam, Great Stuff for instance.
How should I install an anchor bolt in a new foundation?
/An anchor bolt should be installed and set with a proper pipe sleeve in the foundation and tied to the rebar cage prior to pouring the foundation.
What makes up an anchor bolt?
/An anchor bolt is made up of a threaded steel in accordance with ASTM A36 or ASTM A575-M1020.
What is an anti-pullout on anchor bolts?
/An anti-pull out is generally a plate or washer at the bottom of the anchor bolt with a nut where the nut or plate is tack welded to the anchor bolt.
