Techmar
  • About Us
  • Marine Canada / Texas
  • Chemical Food & Beverage Marine Oil & Gas
  • PRODUCTS
  • SERVICES
  • Technical
  • FAQs
  • Contact
Techmar
  • About Us/
  • Chockfast/
    • Marine
    • Canada / Texas
  • OUR INDUSTRIES/
    • Chemical
    • Food & Beverage
    • Marine
    • Oil & Gas
  • PRODUCTS/
  • SERVICES/
  • Technical/
  • FAQs/
  • Contact/
5254898599_c446ebc474_o.jpg
Techmar

Equipment Foundation Systems

FAQs2

Techmar
  • About Us/
  • Chockfast/
    • Marine
    • Canada / Texas
  • OUR INDUSTRIES/
    • Chemical
    • Food & Beverage
    • Marine
    • Oil & Gas
  • PRODUCTS/
  • SERVICES/
  • Technical/
  • FAQs/
  • Contact/
August 02, 2016

How wide should I cut expansion joints?

August 02, 2016/ Ken Gerdes

An expansion joint should be one half inch to an inch wide.

Back to FAQs
August 02, 2016/ Ken Gerdes/ Comment
FAQs, Expansion Joints
Expansion Joints, wide, cut, inch

Ken Gerdes

© TECHMAR 2017

yt_logo_rgb_light.png

Texas Offices: (713) 955-6854
Midwest/Eastern Offices: (630) 663-1802
E: customerservice@techmargrout.com